2024-26 Charger Rear Bumper Side Reflector Tint Overlay (Pre-Cut) Fits SixPack & EV

Ditch the factory red reflectors and embrace a darker, more aggressive aesthetic. This rear bumper side reflector pre-cut overlay tint transforms your 2024-26 Dodge Charger's rear bumper side reflectors with a sleek 5 style finishes that commands attention. Engineered for a perfect fit, it installs seamlessly without modification. Choose your style and charge into the day with a look that matches your vehicle's bold personality. Make a statement that goes beyond standard—make it unmistakably yours.

🔧 Specifications:

• Fitment: For 2024-26 Dodge Charger SixPack & EV
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
• Nano air-release technology for ease of installation
• Comes in (2 PCS) - driver side and passenger side rear bumper side reflector overlay tint.
• ** NOTE ** Not an actual rear bumper side reflector replacement. 
  This product is an overlay that covers and sticks onto the existing reflector surface.

🛠️How to Install:

For Best Results
Tools Needed: Heat gun or blow dryer, padded glove or felt-tip squeegee

Step-by-Step Installation:

1. Rinse the entire rear bumper side reflector with 70% isopropyl alcohol to remove all debris before application.

2. Dry the rear bumper side reflector completely to ensure there is no dust or residue left in the surface or in the crevices.

3. Begin either on the Driver Side or Passenger Side rear bumper side reflector. Align the top of the overlay with the sharper edge that points towards the wheel. Ensure the rounded edge that faces the bumper sensor covers all of the red reflector.
   

4. Once you have aligned the overlay at either edge, the rest will fall into place. If it does not, you can guide the overlay slowly by laying it and matching the edges of the reflector till the red is covered entirely.
   

5. Begin applying the overlay by using your finger or a felt-tip squeegee in a left-to-right motion, moving downward as you are pushing bubbles toward the nearest edge.

6. NOTE The side reflectors may not fit the same as the reflectors may be protruding out more of the bumper or could be more flush, the extra hang (overlay tint that sits off of the flat surface) will need to be tucked into the reflector crevice and bumper (use heat to make it more malleable to bend in the crevice so it holds).
   

7. Continue laying the overlay till it is smoothed down on all parts of the flat surface until the desired placement has been met. (REFER TO PRODUCT PICTURES FOR ACCURATE PLACEMENT)
   

8. Once everything is laid to your desired outcome, follow the below steps to ensure longevity and adhesion.

9. Post-heat the vinyl: Use a heat gun or blow dryer to remove small bubbles and activate the adhesive for stronger bonding.

10. If bubbles remain, press firmly with your finger or squeegee and swipe them out toward the closest edge.

11. If you make a mistake, gently peel off the overlay right away and reapply. Add light heat to remove wrinkles.

12. Important: Light Smoke and Gloss Black overlays include a PET liner that must be removed after installation. Dark Smoke may also include a PET liner. If you are unsure, please contact us.

📌 Reminder: Always post-heat the vinyl after installation. This activates the glue and ensures maximum adhesion.