2024-26 Charger Steering Wheel Emblem Pre-cut Overlay Fits SixPack & EV

Transform your 2024+ Charger Daytona's interior with a custom steering wheel emblem overlay that reflects your personality. Choose from our vibrant color palette to add a distinctive touch that makes every drive uniquely yours. Whether you're matching your mood or coordinating with your cabin aesthetic, Overlays pre-cut overlays stick into place in minutes. Elevate your driving experience and create a space you'll love spending time in. Make your Charger truly one-of-a-kind.

🔧 Specifications:

• Fitment: For 2024+ Dodge Charger SixPack & EV
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
• Comes in ( PAIR OF 4 PIECES) 
  • 2 x Surrounding Pin-stripe
  • 2 x Steering Wheel Logo
• ** NOTE ** Not an actual emblem replacement. 
  This product is a Vinyl Overlay Sticker that covers and sticks onto the existing emblem's surface.

🛠️How to Install:

For Best Results
Tools Needed: Heat gun or blow dryer, padded glove or felt-tip squeegee

Step-by-Step Installation:

1. Rinse the steering wheel emblem and pin stripe with soap/water or 70% isopropryl spray for quicker drying.

2. Dry the steering wheel logo completely to ensure there is no dust or residue left in the surface or in the crevices.

3. Peel off the pin-stripe surround and adjust to placement. Once the desired placement has been met, please follow the next steps.
   

4. Use your finger and add pressure while tracing along the pin-stripe as you lay the pin-stripe down; this will ensure the overlay is stuck onto the surface.
   
   
5. Slowly peel the transfer tape to the colored pin-stripe and check to make sure the pin-stripe is separating from the transfer tape. If it is not, keep applying pressure to the overlay and swiping the overlay with the transfer tape - a heat gun/blow dryer may make it tackier and allow the transfer tape to release more easily.
   
   

6. Once the Pin-stripe is laid on and the transfer tape is peeled off, begin applying the LOGO overlay.

7. Repeat the same steps from 3 to 5 for the logo overlay. Peel the transfer tape to the firstletter and make sure the first letter separates from the transfer tape; if it does not, repeat step 5 again till it separates fully. Do the same for each letter till the transfer tape is fully released.
   
   

8. Once everything is laid out to your desired outcome, follow the steps below to ensure longevity and adhesion.

9. Post-heat the vinyl: Use a heat gun or blow dryer to remove small bubbles and activate the adhesive for stronger bonding.

10. If bubbles remain, press firmly with your finger or squeegee and swipe them out toward the closest edge.

11. If you make a mistake, gently peel off the overlay right away and reapply. Add light heat to remove wrinkles.

📌 Reminder: Always post-heat the vinyl after installation. This activates the glue and ensures maximum adhesion. 

Notice of Non-Affiliation and Disclaimer:
We and this product are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Dodge, or any of its subsidiaries or its affiliates. Dodge, Charger, Sixpack and Daytona are registered trademarks of their respective owners and are used solely to indicate compatibility.

ModConnect sells vinyl decals that are applied on top of your existing emblems. The listing images may show words that are trademarked and are used for illustration purposes only. Product is not affiliated with or endorsed by Dodge.