2024-26 Charger Front Bumper Reflector Tint Overlay (Pre-Cut) Fits SixPack & EV

Transform your 2024-2026 Charger's front end with our precision-cut bumper reflector overlay smoked tint. Swap out that factory bright orange for sleek Dark Smoke, Light Smoke, or pure Black Out finishes that command attention. This aggressive mod takes seconds to apply—just peel, stick, and heat-set for a permanent hold. Elevate your ride's aesthetic without the commitment of permanent modifications.

🔧 Specifications:

• Fitment: For 2024-2026 Dodge Charger SixPack & EV
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
• Nano air-release technology for ease of installation
• Comes in (2 PCS) - driver side and passenger side front bumper reflector overlay tint.
• ** NOTE ** Not an actual front bumper reflector replacement. 
  This product is an overlay that covers and sticks onto the existing reflector surface.

🛠️How to Install:

For Best Results
Tools Needed: Heat gun or blow dryer, padded glove or felt-tip squeegee

Step-by-Step Installation:

1. Rinse the entire front bumper reflector with 70% isopropyl alcohol to remove all debris before application.

2. Dry the front bumper reflector completely to ensure there is no dust or residue left in the surface or in the crevices.

3. Begin either on the Driver Side or Passenger Side front bumper reflector. Align the top of the overlay with the sharper edge that points towards the wheel. Ensure the rounded edge that faces the bumper sensor covers all of the orange reflector.
   

4. Once you have aligned the overlay at either edge, the rest will fall into place. If it does not, you can guide the overlay slowly by laying it and matching  the edges of the reflector till the orange is covered entirely.
   

5. Begin applying the overlay by using your finger or a felt-tip squeegee in a left-to-right motion, moving downward as you are pushing bubbles toward the nearest edge.

6. Continue laying the overlay till it is smoothed down on all parts of the flat surface until the desired placement has been met. (REFER TO PRODUCT PICTURES FOR ACCURATE PLACEMENT)
   

7. Once everything is laid to your desired outcome, follow the below steps to ensure longevity and adhesion.

8. Post-heat the vinyl: Use a heat gun or blow dryer to remove small bubbles and activate the adhesive for stronger bonding.

9. If bubbles remain, press firmly with your finger or squeegee and swipe them out toward the closest edge.

10. If you make a mistake, gently peel off the overlay right away and reapply. Add light heat to remove wrinkles.

11. Important: Light Smoke and Gloss Black overlays include a PET liner that must be removed after installation. Dark Smoke may also include a PET liner. If you are unsure, please contact us.

📌 Reminder: Always post-heat the vinyl after installation. This activates the glue and ensures maximum adhesion.